Shopsmith Mark V 6 In Beltsander belt sander NEW OPEN BOX 505642

Description

Shopsmith Mark V 6 In Beltsander belt sander look at pictures  Condition is NEW  " Shipped with USPS   COMES WITH MANUALS
Some ASSEMBLY may need to be done after item is received due to shipping size or to reduce chance of damage in shipping of the item.
SHIPPING:   I try to ship item the next day after payment is received if ay way possible. I print most of my labels from ebay so you will receive shipping information via email so you should be able to track your shipment.  All shipped items are packed professionally and addressed using the address you have on file with EBAY.
PAYMENT:  I would appreciate being paid at the end of the auction.
INSURANCE / DAMAGE:  According to the Post Office, if your item is damaged during shipment DO NOT discard the box, packing materials or the broken item as all of these items must be given to the postal service for inspection in order to file a claim with the carrier.  You can also file some reports online with the Post Office.
RETURNS:  I do not do returns sorry PLEASE check pictures for Condition
Shopsmith 6" Belt Sander
The Shopsmith Belt Sander -- A Big, 6-inch Wide Belt and Loads of
Great Features Help You Eliminate Hours of Tedious Hand Sanding!
Shopsmith 6" Belt Sander
Few tools will save you more work and time than a stationary belt sander. Its straight line action removes stock quickly and easily... then smooths surfaces and edges to a glass like surface by changing to a fine grit belt.
What You'll Do With Your New Shopsmith Belt Sander
Belt sanders are the ideal tool for smoothing the surfaces and edges of both narrow and wide boards. You'll use it to make easy work of home shop sanding jobs such as:
Removing unsightly mill marks from sawn stock
Sanding bevels, miters and other cuts while using the table to maintain a precise angle or size
Contour sanding odd-shaped workpieces on the back side of the belt (which runs free without a back-up plate)
Sanding protruding joinery (finger laps, lap joints, mortise-and-tenons, dovetails, etc.) flush with workpiece edges or surfaces
Sanding small or unusually-shaped parts that may be difficult or impossible to hold for sanding with hand-held power sanders
When you want to remove stock quickly, sand across the grain. When you want to smooth stock, sand with the grain. In fact, thanks to its straight-line cutting action, you can produce surfaces or edges that are smooth as glass and straight as an arrow by merely changing to a fine grit belt.
When you need true 90° edges, position the worktable along the side of the belt so its surface is 90° to the belt surface... then use the table as a precision rip fence-type guide.
When you need precise, 2-way 90° corners, position the worktable across the belt with its surface 90° to the belt surface... then use the table as a precision back-up to maintain the angle of the stock during sanding.
When you need precise, 3-way 90° corners just use your belt sander's table slot to bring your Mark 7 / Mark V miter gauge into the equation for even more control.
Loaded With Work-Saving, Results-Enhancing Benefits and Accessories
As with all Shopsmith Special Purpose Tools, your belt sander offers a number of great features and accessories to help you make everything you make - better.
Mark 7 / Mark V or Stand Mount
-- Every Shopsmith Special Purpose Tool offers the option of mounting and powering it with your Shopsmith - or with its own, individual, motorized stand.
6" x 9" Support Table
-- Tilts and locks into position to control sanding angles and to act as a back-up during certain operations. It may be used across the belt, parallel to it on either side or at any angle for support when surfacing or edging stock. Your Mark 7 /Mark V's miter gauge or the Shopsmith Tenon-Master jig may be used with the table for added control.
Automatic Belt Tensioning and Tracking
-- Just twist the tensioning knob until it clicks to release the tension for belt changes. Then, depress the knob release lever and everything snaps back to normal automatically. No tension settings required. Special high-crown drum helps to keep the belt on-track at all times, without the need for constant adjustments.
Free-Running Belt on Back Side
-- Since the back side of the belt has no back-up plate, it will flex and give to match the external contours of workpieces.
Built-In Dust Collection Port
-- 2-1/2" dust collection port helps you capture the fine dust created by your belt sander before it gets into your shop environment.
Auxiliary Power Shaft
-- 5/8" shaft extends from the drive roller to accept the
Shopsmith Drum Sander (505552)
. Or, use your
Shopsmith 1/4" Router Chuck
to hold our small drum sanders.
Specifications
Belt Size
6" x 48"
Table Size
6" x 9"
Table Tilt
0 to 20° into belt
45° away from belt
Backup Plate
6" x 16-1/32"
(14" to the left)
Bearings
4 ball bearings
(2 each on driver & idler drums)
Drums
(2) 3" diameter
(Drive drum rubber coated)
Speed
1,150 to 1,900 rpm
(recommended)
Weight
36 lbs.
Shopsmith Tools in Action
Watch these online videos to see this amazing tool in action
Sanding Curves and Contours
Belt Sander Fence
Belt Sander Tune-Up
Crowning a Sanding Belt
Shopsmith 6" Belt Sander
The Shopsmith Belt Sander -- A Big, 6-inch Wide Belt and Loads of
Great Features Help You Eliminate Hours of Tedious Hand Sanding!
Shopsmith 6" Belt Sander
Few tools will save you more work and time than a stationary belt sander. Its straight line action removes stock quickly and easily... then smooths surfaces and edges to a glass like surface by changing to a fine grit belt.
What You'll Do With Your New Shopsmith Belt Sander
Belt sanders are the ideal tool for smoothing the surfaces and edges of both narrow and wide boards. You'll use it to make easy work of home shop sanding jobs such as:
Removing unsightly mill marks from sawn stock
Sanding bevels, miters and other cuts while using the table to maintain a precise angle or size
Contour sanding odd-shaped workpieces on the back side of the belt (which runs free without a back-up plate)
Sanding protruding joinery (finger laps, lap joints, mortise-and-tenons, dovetails, etc.) flush with workpiece edges or surfaces
Sanding small or unusually-shaped parts that may be difficult or impossible to hold for sanding with hand-held power sanders
When you want to remove stock quickly, sand across the grain. When you want to smooth stock, sand with the grain. In fact, thanks to its straight-line cutting action, you can produce surfaces or edges that are smooth as glass and straight as an arrow by merely changing to a fine grit belt.
When you need true 90° edges, position the worktable along the side of the belt so its surface is 90° to the belt surface... then use the table as a precision rip fence-type guide.
When you need precise, 2-way 90° corners, position the worktable across the belt with its surface 90° to the belt surface... then use the table as a precision back-up to maintain the angle of the stock during sanding.
When you need precise, 3-way 90° corners just use your belt sander's table slot to bring your Mark 7 / Mark V miter gauge into the equation for even more control.
Loaded With Work-Saving, Results-Enhancing Benefits and Accessories
As with all Shopsmith Special Purpose Tools, your belt sander offers a number of great features and accessories to help you make everything you make - better.
Mark 7 / Mark V or Stand Mount
-- Every Shopsmith Special Purpose Tool offers the option of mounting and powering it with your Shopsmith - or with its own, individual, motorized stand.
6" x 9" Support Table
-- Tilts and locks into position to control sanding angles and to act as a back-up during certain operations. It may be used across the belt, parallel to it on either side or at any angle for support when surfacing or edging stock. Your Mark 7 /Mark V's miter gauge or the Shopsmith Tenon-Master jig may be used with the table for added control.
Automatic Belt Tensioning and Tracking
-- Just twist the tensioning knob until it clicks to release the tension for belt changes. Then, depress the knob release lever and everything snaps back to normal automatically. No tension settings required. Special high-crown drum helps to keep the belt on-track at all times, without the need for constant adjustments.
Free-Running Belt on Back Side
-- Since the back side of the belt has no back-up plate, it will flex and give to match the external contours of workpieces.
Built-In Dust Collection Port
-- 2-1/2" dust collection port helps you capture the fine dust created by your belt sander before it gets into your shop environment.
Auxiliary Power Shaft
-- 5/8" shaft extends from the drive roller to accept the
Shopsmith Drum Sander (505552)
. Or, use your
Shopsmith 1/4" Router Chuck
to hold our small drum sanders.
Specifications
Belt Size
6" x 48"
Table Size
6" x 9"
Table Tilt
0 to 20° into belt
45° away from belt
Backup Plate
6" x 16-1/32"
(14" to the left)
Bearings
4 ball bearings
(2 each on driver & idler drums)
Drums
(2) 3" diameter
(Drive drum rubber coated)
Speed
1,150 to 1,900 rpm
(recommended)
Weight
36 lbs.
Shopsmith Tools in Action
Watch these online videos to see this amazing tool in action
Sanding Curves and Contours
Belt Sander Fence
Belt Sander Tune-Up
Crowning a Sanding Belt